Linux version 2.6.27-ARCH (root@T-POWA-LX) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Sun Oct 26 10:36:46 UTC 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fe80000 (usable) BIOS-e820: 000000007fe80000 - 000000007ff00000 (ACPI NVS) BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) last_pfn = 0x7fe80 max_arch_pfn = 0x100000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 kernel direct mapping tables up to 38000000 @ 7000-c000 RAMDISK: 7fda3000 - 7fe6fc31 Allocated new RAMDISK: 00510000 - 005dcc31 Move RAMDISK from 000000007fda3000 - 000000007fe6fc30 to 00510000 - 005dcc30 DMI present. ACPI: RSDP 000F6700, 0014 (r0 HP ) ACPI: RSDT 7FE85744, 0040 (r1 HP 30B3 6040000 LTP 0) ACPI: FACP 7FE8CE20, 0074 (r1 HP 30B3 6040000 LOHR 64) ACPI: DSDT 7FE862D2, 6B4E (r1 HP 30B3 6040000 MSFT 100000E) ACPI: FACS 7FE8DFC0, 0040 ACPI: APIC 7FE8CE94, 0068 (r1 HP 30B3 6040000 LOHR 64) ACPI: BOOT 7FE8CFD8, 0028 (r1 HP 30B3 6040000 LTP 1) ACPI: MCFG 7FE8CF34, 003C (r1 HP 30B3 6040000 LOHR 64) ACPI: APIC 7FE8CF70, 0068 (r1 HP 30B3 6040000 LTP 0) ACPI: SSDT 7FE860C4, 020A (r1 HP 30B3 1000 INTL 20050624) ACPI: SSDT 7FE85784, 04F6 (r1 HP 30B3 3000 INTL 20050624) ACPI: BIOS bug: multiple APIC/MADT found, using 0 ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org ACPI: DMI detected: Hewlett-Packard 1150MB HIGHMEM available. 896MB LOWMEM available. mapped low ram: 0 - 38000000 low ram: 00000000 - 38000000 bootmap 00008000 - 0000f000 (9 early reservations) ==> bootmem [0000000000 - 0038000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 000050c280] TEXT DATA BSS ==> [0000100000 - 000050c280] #4 [000050d000 - 0000510000] INIT_PG_TABLE ==> [000050d000 - 0000510000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #7 [0000510000 - 00005dcc31] NEW RAMDISK ==> [0000510000 - 00005dcc31] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] found SMP MP-table at [c00f67f0] 000f67f0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x00038000 HighMem 0x00038000 -> 0x0007fe80 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0007fe80 On node 0 totalpages: 523807 free_area_init_node: node 0, pgdat c03d8200, node_mem_map c1000000 DMA zone: 3967 pages, LIFO batch:0 Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 292227 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) PERCPU: Allocating 39324 bytes of per cpu data NR_CPUS: 16, nr_cpu_ids: 2, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519714 Kernel command line: root=/dev/sda1 ro vga=791 quiet Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) TSC: PIT calibration confirmed by PMTIMER. TSC: using PIT calibration value Detected 1662.471 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2071944k/2095616k available (2147k kernel code, 22304k reserved, 844k data, 288k init, 1178112k highmem) virtual kernel memory layout: fixmap : 0xffee8000 - 0xfffff000 (1116 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc03f3000 - 0xc043b000 ( 288 kB) .data : 0xc0318f36 - 0xc03ec320 ( 844 kB) .text : 0xc0100000 - 0xc0318f36 (2147 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Calibrating delay loop (skipped), value calculated using timer frequency.. 3326.48 BogoMIPS (lpj=5541570) Security Framework initialized Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using mwait in idle threads. Checking 'hlt' instruction... OK. ACPI: Core revision 20080609 ACPI: Checking initramfs for custom DSDT ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 06 Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3326.39 BogoMIPS (lpj=5541431) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (6652.87 BogoMIPS). net_namespace: 832 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE storm detected, disabling EC GPE ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in poll mode ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled PCI: 0000:00:1b.0 reg 10 64bit mmio: [d6400000, d6403fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled PCI: 0000:00:1d.0 reg 20 io port: [1800, 181f] PCI: 0000:00:1d.1 reg 20 io port: [1820, 183f] PCI: 0000:00:1d.2 reg 20 io port: [1840, 185f] PCI: 0000:00:1d.3 reg 20 io port: [1860, 187f] PCI: 0000:00:1d.7 reg 10 32bit mmio: [d6404000, d64043ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO PCI: 0000:00:1f.1 reg 10 io port: [0, 7] PCI: 0000:00:1f.1 reg 14 io port: [0, 3] PCI: 0000:00:1f.1 reg 18 io port: [0, 7] PCI: 0000:00:1f.1 reg 1c io port: [0, 3] PCI: 0000:00:1f.1 reg 20 io port: [1880, 188f] PCI: 0000:00:1f.2 reg 10 io port: [18c8, 18cf] PCI: 0000:00:1f.2 reg 14 io port: [18ac, 18af] PCI: 0000:00:1f.2 reg 18 io port: [18c0, 18c7] PCI: 0000:00:1f.2 reg 1c io port: [18a8, 18ab] PCI: 0000:00:1f.2 reg 20 io port: [18b0, 18bf] PCI: 0000:00:1f.2 reg 24 32bit mmio: [d6404400, d64047ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled PCI: 0000:00:1f.3 reg 20 io port: [18e0, 18ff] PCI: 0000:01:00.0 reg 10 32bit mmio: [d5000000, d5ffffff] PCI: 0000:01:00.0 reg 14 32bit mmio: [c0000000, c7ffffff] PCI: 0000:01:00.0 reg 1c 64bit mmio: [d4000000, d4ffffff] PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff] PCI: bridge 0000:00:01.0 32bit mmio: [d4000000, d5ffffff] PCI: bridge 0000:00:01.0 64bit mmio pref: [c0000000, cfffffff] PCI: bridge 0000:00:1c.0 io port: [2000, 2fff] PCI: bridge 0000:00:1c.0 32bit mmio: [d2000000, d3ffffff] PCI: bridge 0000:00:1c.0 64bit mmio pref: [d0000000, d1ffffff] PCI: 0000:05:00.0 reg 10 32bit mmio: [d6000000, d6000fff] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold pci 0000:05:00.0: PME# disabled PCI: bridge 0000:00:1c.3 32bit mmio: [d6000000, d60fffff] PCI: 0000:08:08.0 reg 10 32bit mmio: [d6100000, d6100fff] PCI: 0000:08:08.0 reg 14 io port: [3000, 303f] pci 0000:08:08.0: supports D1 pci 0000:08:08.0: supports D2 pci 0000:08:08.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:08:08.0: PME# disabled PCI: 0000:08:09.0 reg 10 32bit mmio: [d6101000, d61017ff] pci 0000:08:09.0: supports D1 pci 0000:08:09.0: supports D2 pci 0000:08:09.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:08:09.0: PME# disabled PCI: 0000:08:09.1 reg 10 32bit mmio: [d6101800, d61018ff] pci 0000:08:09.1: supports D1 pci 0000:08:09.1: supports D2 pci 0000:08:09.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:08:09.1: PME# disabled PCI: 0000:08:09.2 reg 10 32bit mmio: [d6101c00, d6101cff] pci 0000:08:09.2: supports D1 pci 0000:08:09.2: supports D2 pci 0000:08:09.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:08:09.2: PME# disabled PCI: 0000:08:09.3 reg 10 32bit mmio: [d6102000, d61020ff] pci 0000:08:09.3: supports D1 pci 0000:08:09.3: supports D2 pci 0000:08:09.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:08:09.3: PME# disabled PCI: 0000:08:09.4 reg 10 32bit mmio: [d6102400, d61024ff] pci 0000:08:09.4: supports D1 pci 0000:08:09.4: supports D2 pci 0000:08:09.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:08:09.4: PME# disabled pci 0000:00:1e.0: transparent bridge PCI: bridge 0000:00:1e.0 io port: [3000, 3fff] PCI: bridge 0000:00:1e.0 32bit mmio: [d6100000, d61fffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet clockevent registered ACPI: RTC can wake from S4 system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved system 00:05: ioport range 0x800-0x80f has been reserved system 00:05: ioport range 0x1000-0x107f has been reserved system 00:05: ioport range 0x1180-0x11bf has been reserved system 00:05: ioport range 0x1200-0x120f has been reserved system 00:06: ioport range 0x6a0-0x6af has been reserved system 00:06: ioport range 0x6b0-0x6ff has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: 0xd4000000-0xd5ffffff pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: 0x2000-0x2fff pci 0000:00:1c.0: MEM window: 0xd2000000-0xd3ffffff pci 0000:00:1c.0: PREFETCH window: 0x000000d0000000-0x000000d1ffffff pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.2: IO window: disabled pci 0000:00:1c.2: MEM window: disabled pci 0000:00:1c.2: PREFETCH window: disabled pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.3: IO window: disabled pci 0000:00:1c.3: MEM window: 0xd6000000-0xd60fffff pci 0000:00:1c.3: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08 pci 0000:00:1e.0: IO window: 0x3000-0x3fff pci 0000:00:1e.0: MEM window: 0xd6100000-0xd61fffff pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffff] bus: 01 index 0 mmio: [0, 0] bus: 01 index 1 mmio: [d4000000, d5ffffff] bus: 01 index 2 mmio: [c0000000, cfffffff] bus: 01 index 3 mmio: [0, 0] bus: 02 index 0 io port: [2000, 2fff] bus: 02 index 1 mmio: [d2000000, d3ffffff] bus: 02 index 2 mmio: [d0000000, d1ffffff] bus: 02 index 3 mmio: [0, 0] bus: 04 index 0 mmio: [0, 0] bus: 04 index 1 mmio: [0, 0] bus: 04 index 2 mmio: [0, 0] bus: 04 index 3 mmio: [0, 0] bus: 05 index 0 mmio: [0, 0] bus: 05 index 1 mmio: [d6000000, d60fffff] bus: 05 index 2 mmio: [0, 0] bus: 05 index 3 mmio: [0, 0] bus: 08 index 0 io port: [3000, 3fff] bus: 08 index 1 mmio: [d6100000, d61fffff] bus: 08 index 2 mmio: [0, 0] bus: 08 index 3 io port: [0, ffff] bus: 08 index 4 mmio: [0, ffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... done Freeing initrd memory: 819k freed Simple Boot Flag at 0x36 set to 0x1 apm: BIOS not found. highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1749 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device pci 0000:08:08.0: Firmware left e100 interrupts enabled; disabling pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:01.0: found MSI capability pci_express 0000:00:01.0:pcie00: allocate port service pci_express 0000:00:01.0:pcie03: allocate port service pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service pcieport-driver 0000:00:1c.2: setting latency timer to 64 pcieport-driver 0000:00:1c.2: found MSI capability pci_express 0000:00:1c.2:pcie00: allocate port service pci_express 0000:00:1c.2:pcie02: allocate port service pci_express 0000:00:1c.2:pcie03: allocate port service pcieport-driver 0000:00:1c.3: setting latency timer to 64 pcieport-driver 0000:00:1c.3: found MSI capability pci_express 0000:00:1c.3:pcie00: allocate port service pci_express 0000:00:1c.3:pcie02: allocate port service pci_express 0000:00:1c.3:pcie03: allocate port service vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 3072k, total 32768k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: protected mode interface info at c000:d4f0 vesafb: pmi: set display start = c00cd526, set palette = c00cd590 vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver4 ports, IRQ sharing disabled input: Macintosh mouse button emulation as /class/input/input0 PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Freeing unused kernel memory: 288k freed Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 No dock devices found. SCSI subsystem initialized libata version 3.00 loaded. ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xd6404400 port 0xd6404500 irq 219 ata2: DUMMY ata3: SATA max UDMA/133 abar m1024@0xd6404400 port 0xd6404600 irq 219 ata4: DUMMY ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: ATA-7: FUJITSU MHV2120BH PL, 892C, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: configured for UDMA/100 ata3: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2120B 892C PQ: 0 ANSI: 5 ata_piix 0000:00:1f.1: version 2.12 ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi4 : ata_piix scsi5 : ata_piix ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15 Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-4084N, KQ09, max MWDMA2 ata5.00: configured for MWDMA2 ata6: port disabled. ignoring. scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4084N KQ09 PQ: 0 ANSI: 5 Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem XFS mounting filesystem sda1 Ending clean XFS mount for filesystem: sda1 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, hpet irqs HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 ACPI: SSDT 7FE85E93, 01A8 (r1 PmRef Cpu0Ist 3000 INTL 20050624) ACPI: SSDT 7FE85C7A, 0194 (r1 PmRef Cpu0Cst 3001 INTL 20050624) ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI0007:00: registered as cooling_device0 ACPI: SSDT 7FE8603B, 0089 (r1 PmRef Cpu1Ist 3000 INTL 20050624) ACPI: SSDT 7FE85E0E, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI0007:01: registered as cooling_device1 Marking TSC unstable due to TSC halts in idle iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks iwl3945: Copyright(c) 2003-2008 Intel Corporation iwl3945 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 iwl3945 0000:05:00.0: setting latency timer to 64 iwl3945: Detected Intel Wireless WiFi Link 3945ABG iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels phy0: Selected rate control algorithm 'iwl-3945-rs' iwl3945 0000:05:00.0: PCI INT A disabled Linux video capture interface: v2.00 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) ACPI: AC Adapter [ADP1] (off-line) Clocksource tsc unstable (delta = -182963555 ns) ACPI: Battery Slot [BAT0] (battery present) input: Power Button (FF) as /class/input/input2 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input3 ACPI: Lid Switch [LID0] input: Sleep Button (CM) as /class/input/input4 ACPI: Sleep Button (CM) [SLPB] input: Power Button (CM) as /class/input/input5 ACPI: Power Button (CM) [PWRB] thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZS0] (32 C) thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [TZS1] (32 C) USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: WMI: Mapper loaded ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd6404000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 8 ports detected input: Video Bus as /class/input/input6 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) input: Video Bus as /class/input/input7 Linux agpgart interface v0.103 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001840 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 3-5: new high speed USB device using ehci_hcd and address 2 nvidia: module license 'NVIDIA' taints kernel. sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 3-5: configuration #1 chosen from 1 choice uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0) input: USB 2.0 Camera as /class/input/input8 sdhci-pci 0000:08:09.1: SDHCI controller found [1180:0822] (rev 19) sdhci-pci 0000:08:09.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 mmc0: SDHCI controller on PCI [0000:08:09.1] using PIO e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation e100 0000:08:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e100 0000:08:08.0: PME# disabled e100: eth0: e100_probe: addr 0xd6100000, irq 20, MAC addr 00:16:d3:13:c5:69 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ACPI: I/O resource 0000:00:1f.3 [0x18e0-0x18ff] conflicts with ACPI region SMBI [0x18e0-0x18ef] ACPI: Device needs an ACPI driver input: PC Speaker as /class/input/input9 usb 4-2: new full speed USB device using uhci_hcd and address 2 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 4:0:0:0: Attached scsi generic sg1 type 5 nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nvidia 0000:01:00.0: setting latency timer to 64 NVRM: loading NVIDIA UNIX x86 Kernel Module 177.80 Wed Oct 1 14:38:10 PDT 2008 ricoh-mmc: Ricoh MMC Controller disabling driver ricoh-mmc: Copyright(c) Philip Langdale ricoh-mmc: Ricoh MMC controller found at 0000:08:09.2 [1180:0843] (rev 1) ricoh-mmc: Controller is now disabled. ohci1394 0000:08:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 usb 4-2: configuration #1 chosen from 1 choice ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[d6101000-d61017ff] Max Packet=[2048] IR/IT contexts=[4/4] intel_rng: FWH not detected Error: Driver 'pcspkr' is already registered, aborting... Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000 input: SynPS/2 Synaptics TouchPad as /class/input/input10 Bluetooth: Core ver 2.13 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: HCI USB driver ver 2.10 usbcore: registered new interface driver hci_usb kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. XFS mounting filesystem sda6 ieee1394: Host added: ID:BUS[0-00:1023] GUID[06e40a0087b25044] Ending clean XFS mount for filesystem: sda6 kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1052248k swap on /dev/sda3. Priority:-1 extents:1 across:1052248k iwl3945 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 iwl3945 0000:05:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006) firmware: requesting iwlwifi-3945-1.ucode Registered led device: iwl-phy0:radio Registered led device: iwl-phy0:assoc Registered led device: iwl-phy0:RX Registered led device: iwl-phy0:TX wlan0: authenticate with AP 00:18:84:20:f2:8a wlan0: authenticated wlan0: associate with AP 00:18:84:20:f2:8a wlan0: RX AssocResp from 00:18:84:20:f2:8a (capab=0x431 status=0 aid=1) wlan0: associated Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.2 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bridge firewalling registered pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.10 evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html APIC error on CPU1: 00(40) APIC error on CPU0: 00(40) input: Logitech Bluetooth Mouse as /class/input/input11 NET: Registered protocol family 10 lo: Disabled Privacy Extensions wlan0: no IPv6 routers present